DX NetOps 21.2 network monitoring software continues to innovate and improve the scale, speed, and simplicity of network operations with a focused set of high-value features and capabilities. The solution collects data (network faults, performance, events, and alarms) from SDN and WiFi controllers and orchestrators to deliver deep visibility into the health and performance of your modern network deployments.
Additionally, the solution correlates data from different network streams. It brings end-to-end visibility within a unified portal to help customers, not only monitoring their traditional network devices but the latest modern networking technologies as well.
Broadcom enhanced its analytic capabilities in the latest release of the DX NetOps network monitoring software to enable network operations teams to reliably deliver applications’ experiences over SD-WAN technologies built on VMware VeloCloud and Cisco Meraki.
Expanded Network Monitoring Capabilities for VMware SD-WAN by VeloCloud
Our network monitoring software has also enabled fast and easy monitoring of VMware SD-WAN by VeloCloud. The latest release of the DX NetOps solution delivers the following key capabilities for monitoring and assuring your VMware SD-WAN deployments:
Inventory
- Collects the following network components from VeloCloud Orchestrator:
- Orchestrator, Enterprise Proxy, Enterprises, Gateway Pool, Gateways, Sites, Edges, Edge Interfaces, Edge Sub Interfaces, Links, Tunnels (Edge to Edge, Edge to Gateway), Policy Class, SLA Path, Alarms, and Events raised on Orchestrator and Edges
Performance
- Collect performance metrics from both SNMP and Rest APIs on all the key network elements: Devices, Interfaces, Tunnels, Links, and SLA paths
Alarms/Events
- Collect all the events from the VeloCloud Orchestrator and forward them to DX NetOps to do one-of-a-kind event correlation, fault isolation, and root cause analysis
Topology
- End-to-end visibility of how different sites are connected, including policies, tunnels information
Figure 1: Interactive SD-WAN geo map delivers real-time WAN status and performance.
Expanded Network Monitoring Capabilities for Cisco Meraki LAN and WiFi
The DX NetOps solution has enhanced its monitoring capabilities for Cisco Meraki MS switch devices to provide end-to-end visibility across Cisco Meraki appliances. In previous versions of this network monitoring software, the solution enabled you to monitor Meraki MR WiFi Access Point devices and Meraki MX security appliances. DX NetOps is now able to collect the following key components of Cisco Meraki switches for improved network operations visibility and resilience of your LAN and WiFi deployments:
Inventory
- Organization, Networks, MS Devices, Clients, Uplink Interfaces for MS Devices
Policies and Tunnels
- MS and MX device communication and performance
Performance
- Latency and packet loss percentage for devices and tunnels (NormalizedSDNTunnelInfo)
- Wireless infrastructure performance and health
Event/Alarms
- Support for Meraki MS alarms via API and Syslog
Topology
- End-to-end visibility of Meraki MX, MR, and MS devices
Figure 2: DX NetOps Spectrum includes fault management and topology features for Cisco Meraki technologies.
Expanded Network Monitoring Capabilities for Nokia Nuage Software-Defined Data Center (SDDC)
DX NetOps continues its innovation in SDx monitoring with coverage for Nokia Nuage SDDC deployments. The solution unifies fault and performance visibility while reducing alarm noise and delivering easy workflows that correlate the software-defined overlay with the underlay infrastructure for quick triage of this modern network technology.
The solution integrates with two Nuage components: Nuage Virtual Service Directory (VSD) to collect overlay information about the Nuage Fabric network and the Nuage Virtualized Service Assurance Platform (VSAP) to provide fault, performance, and inventory capabilities to deliver the following use cases:
- How Nuage Private Cloud and Nuage Fabric/Gateway network are configured
- Ability to discover and correlate physical network with virtual network
- Reduce alarm noise by showing only actionable alarms and provide effective root cause analysis
- Alarm suppression and correlation of re-route/path-change/link down alarms with performance-based events
- Correlate the software-defined overlay with the underlay infrastructure that are supporting network delivery policies
Register for our external webcast: What’s New in NetOps 21.2 on July 8, 2021, to see all these features discussed and get any questions answered.
Sarbdeep Singh
Sarbdeep Singh holds the position of product manager for the network operational intelligence team. Bringing over 16 years of expertise in the network/system management domain, he adeptly navigates the intricate landscape of NetOps solutions, enhancing overall efficiency and performance.
Other resources you might be interested in
Automic Automation: Getting Started with the Automic Web Interface Version 26
Get started with the v26 Automic Web Interface (AWI). Learn how to navigate the modernized UI, customize your workspace, and move between perspectives.
Automic Automation v26: Zero Downtime Upgrade (ZDU)
Learn how to employ the Zero Downtime Upgrade (ZDU) process. Transition from Automic v24 to v26 while your mission-critical workflows continue to execute.
ValueOps ConnectALL: Synchronize Jira and Rally for Frictionless Cost Accounting
This course teaches you how to integrate Jira data into Rally for the purpose of frictionless cost accounting in Clarity.
AppNeta: Introducing the Intelligent Alarms Experience
Learn how to use the new Intelligent Alarms experience in AppNeta, including new metrics, new user workflows, and the new thresholding, event, and alarm system.
Rally Office Hours: April 16, 2026
Join Rally Office Hours to get expert tips and the latest product news. Explore new AI controls, Monte Carlo simulation for milestones, and more.
Announcing AutoSys 24.2: Accelerating Operations with Self-Service Agility and Automated Security
Learn how AutoSys 24.2 helps reduce administrative bottlenecks, minimize security risks, and accelerate incident resolution.
The Next Chapter for AutoSys: Moving Toward the Intelligent Control Plane
Is Broadcom still investing in AutoSys? Yes! Learn about the V26 roadmap, which features MCP orchestration, AI job types, and AI-powered developer assistance.
Automic Automation: Upgrading to Version 26
This course guides you through and demonstrates the process to upgrade Automic Automation from version 24 to version 26 on a Windows platform. The Unix upgrade is virtually the same.
Automic Automation: Integrated Database Maintenance
See how Automic administrators can leverage the Integrated Database Maintenance suite to optimize their Automation Engine database for peak performance.